Description
Product Description
Used for the collection of sewage, effluent, drainage, toilet, and seepage water removal for homes, farms, light commercial and industrial use. The 9S-SMPXRT-K Simplex System is pre-assembled and ready for installation. This sewage system is able to handle both liquid and solid waste up to 2″ in diameter. The 9S-SMPXRT-K features a 115-volt, 4/10 hp, 6000 gph epoxy-coated cast iron sewage pump with nylon impeller which includes a piggyback tethered float switch that activates when the liquid reaches 16″ – 19″ and shuts off when the water level falls to between 9″ and 11″. The pump has a 20' shut-off and a maximum of 8.7 PSI. This system includes the sewage pump, an 18″ diameter x 30″ high density polyethylene structural foam basin, a 2″ check valve, 4″ adapatflex and multi-tite grommet for the inlet, a 1-piece structural foam slip-fit flange cover with removable bolts that is set-up for a 2″ or 3″ vent and includes a 28.2″ schedule 80 PVC pipe and a 2-cord grommet. The 9S-SMPXRT-K (item # 509073) does not come with an alarm.
This pump is equipped with an air bleed hole which prevents the pump from being airlocked and allowing trapped air to escape. A large volume of water will spray from the pump. The pump is NOT DEFECTIVE. This is normal operation and does not affect the performance of the pump.
From the Manufacturer
Simplex Package with Roll Top Ployethylene Basin and Slip-Fit Flanges / One-piece Structural Foam Cover. For collection of sewage, effluent, drainage and seepage water. Suitable for homes, farms, light commercial and industrial use. Pre-assembled systems are provided ready to install. Includes CV-SE2 check valve and 2-Inch discharge.
Reviews
There are no reviews yet.